PFXLM4301TADDC HMI Proface LT-4301M
Jual HMI Proface PFXLM4301TADDC LT-4301M
HMI Proface PFXLM4301TADDC | LT-4301M
PFXLM4301TADDC HMI Proface LT-4301M Standard Info :
Proface PFXLM4301TADDC Functional Specifications
| PFXLM4301TADDC Type | TFT Color LCD | ||
|---|---|---|---|
| Resolution (pixels) | 320 x 240 (QVGA) | ||
| Active display area (W x H) | 115.2 x 86.4 mm (4.53 x 3.40 in.) | ||
| Display Colors | 65,536 colors | ||
| PFXLM4301TADDC Backlight |
White LED | ||
| Non-exchangeable | |||
| LED ON / OFF control, adjustable screen saver activation time | |||
| Brightness adjustment | 16 levels of adjustment available via touch panel in the configuration menu | ||
| Language Fonts *1 | Japanese, ASCII, Chinese (Simplified), Chinese (Traditional), Korean, Cyrillic, Thai | ||
| Character sizes | 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts | ||
| Font sizes | Width can be expanded 1 to 8 times. Height can be expanded 1/2 and 1 to 8 times. | ||
| 8 x 8 pixels | 40 characters per row x 30 rows | ||
| 8 x 16 pixels | 40 characters per row x 15 rows | ||
| 16 x 16 pixels | 20 characters per row x 15 rows | ||
| 32 x 32 pixels | 10 characters per row x 7 rows | ||
| Memory |
PFXLM4301TADDCApplication Memory |
When using GP-Pro EX: Media: FLASH EPROM Screen Area *2: 16MB User Font Area: 8MB Logic Program Area: 132KB (Equivalent to 15,000 steps）*3 Free Space: NoneRemovable System: None |
|
| PFXLM4301TADDC Backup Memory |
When using GP-Pro EX: Screen Area: nvSRAM 128KB Variable Area: nvSRAM 64KBBattery: Memory / Primary battery for clock data backup (Send back for replacement) |
||
| Touch Panel | Type | Resistive Film (analog) | |
| Lifetime | 1 million touches or more | ||
| Interface | PFXLM4301TADDC Serial (COM1) |
RS-232C/RS485 x 1
RS-232C (Connector type: RJ45, Isolation: None, Maximum baud rate: 115,200 bps, Cable Type: Shielded, Cable Maximum length: 15 m (49 ft), 5 Vdc power supply for RS-232C: None) RS-485 (Connector type: RJ45, Isolation: None, Maximum baud rate: 115,200 bps, Cable Type: Shielded, Cable Maximum length: 200 m (656 ft), Polarization: Setting is required via software when connecting Multiple LTs. Refer to the “GP-Pro EX Device/ PLC Manual” for the setting. 5 Vdc power supply for RS-485: None) *4 |
|
| PFXLM4301TADDC Ethernet |
IEEE802.3 compliant Ethernet x 1
(Connector type: RJ45, Driver: 10 M half duplex (auto negotiation)/ 100 M full duplex (auto negotiation), Cable type: Shielded, Automatic cross-over detection: Yes) |
||
| USB (Type A) | USB 2.0 (Type A) x 1 (Power Supply Voltage: 5Vdc +/-5%, Maximum Current Supplied: 500mA, Maximum Transmission Distance: 5m (16.4 ft.)) |
||
| USB (Mini-B) | USB 2.0 (Mini-B) x 1 | ||
| Control | DIO (Source Type) | 20 Points Standard Input (including 2 Points for Fast Input) 10 Points Standard Output, 2 Points for Fast Output |
|
Note :
*1) Please refer to the GP-Pro EX Reference Manual(link is external) for details on font types and character codes.
*2) Use the screen area when the user font area’s capacity is exceeded – for example, when an image font or a picture font is used.
*3) Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB.
*4) 2-wire connection is available for RS-485. When a Device/PLC supports 2-wire connection, 4 wires (RXD+, TXD+, RXD-, and TXD-) can be short-circuited to be 2 wires (RXD+ and TXD+ = D1, RXD- and TXD- = D0). For details on the connection, refer to the connection manual.
Proface PFXLM4301TADDC General Specifications
| International Safety Standards |
|
|---|---|
| Rated Input Voltage | 24 Vdc |
| Input Voltage Limits | 20 to 28.8 Vd |
| Acceptable Voltage Drop | 10 ms or less at 20.4 Vdc |
| Power Consumption | 10 W or less |
| In-Rush Current | 30 A or less at 28.8 Vdc |
| Voltage Endurance between power terminal and frame ground (FG) | 500 Vdc for 1 minute |
| Insulation Resistance between power terminal and FG | 10 MΩ or higher at 500 Vdc |
Proface PFXLM4301TADDC Environmental Specifications
| Standard compliance | IEC 61131-2 | |
|---|---|---|
| Ambient operating temperature for the display and the rear module | Horizontal installation | 0 to 50°C (32 to 122°F) |
| Vertical installation | 0 to 40°C (32 to 104°F) | |
| Storage temperature | – 20 to 60°C (- 4 to 140°F) | |
| Storage altitude | 0 to 10,000 m (0 to 32,808 ft) | |
| Operating altitude | 0 to 2,000 m (0 to 6,560 ft) | |
Surrounding Air and Strage Humidity |
5 to 85% w/o condensation (non-condensing, wet bulb temperature 39°C (102.2°F) or less) | |
| Degree of pollution | IEC60664 | 2 |
| Degree of protection | IEC61131-2 | IP20 with protective covers in place |
| Corrosive gases | Free of corrosive gases | |
| Dust | ≤0.1 mg/m3 (10-7 oz/ft3) (non-conductive levels) | |
| Atmospheric pressure (Operating Altitude) | 800 to 1,114 hPa (2000 m (6,561 ft) or lower) | |
| Vibration resistance | Mounted on a DIN rail | 3.5 mm (0.138 in.) fixed amplitude from 5 to 8.4 Hz 9.8 m/s2 (1 gn) fixed acceleration from 8.4 to 150 Hz |
| Mounted on a panel | 3.5 mm (0.138 in.) fixed amplitude from 5 to 8.6 Hz 9.8 m/s2 (1 gn) fixed acceleration from 8.6 to 150 Hz |
|
| Mechanical shock resistance | Mounted on a DIN rail | 147 m/s2 (15 gn) for a duration of 11 ms |
| Mounted on a panel | 147 m/s2 (15 gn) for a duration of 6 ms | |
| Electrostatic discharge | IEC/EN 61000-4-2 | 8 kV (air discharge) 6 kV (contact discharge) |
| Rediated radio frequency electromagnetic fields | IEC/EN 61000-4-3 | 10 V/m (80 MHz to 3 GHz) |
| Fast transients / Burst noise | IEC/EN 61000-4-4 | Power lines: 2 kV Digital I/O: 1 kV Relay outputs: 2 kV Ethernet line: 1 kV COM line: 1 kV CAN line: 1 kV |
PFXLM4301TADDCSurge immunity |
IEC/EN 61000-4-5 | Power supply: CM: 1 kV; DM: 0.5 kV Digital I/O: CM: 1 kV; DM: 0.5 kV Shielded cable: 1 kV CM = common drive DM = differential drive |
| Conducted disturbances induced by radio-frequency fields | IEC/EN 61000-4-6 | 10 Veff (0.15 to 80 MHz) |
| Mains terminal dusturbance voltage | EN 55011 (IEC/CISPR11) | 150 to 500 kHz, quasi peak 79 dBμV |
| 500 kHz to 30 MHz, quasi peak 73 dBμV | ||
| Electric field strength | EN 55011 (IEC/CISPR11) | 30 to 230 MHz, quasi peak 10 m @40 dBμV/m |
| 230 MHz to 1 GHz, quasi peak 10 m @47 dBμV/m | ||
| Vibration immunity (operating) | IEC 61131-2 | |
| Protection structure | NEMA TYPE 4X (indoors, with panel embedded) | |
| Protection (front module) | IP65f – (IEC 60529) | |
| Protection (rear module) | IP 20 – (IEC 60529) | |
| Shock immunity (operating) | IEC 61131-2 15 gn 11 ms |
|
| Cooling method | Natural air circulation | |
| Weight | 749 g (26.41 oz) | |
| Color | Front module: PT404 Rear module: RAL 7032 | |
| Material | Front module: PAA+GF Rear module: PC/PBT |
|
Proface PFXLM4301TADDC Digital Input Characteristics
| Rated Current | 5 mA | |
|---|---|---|
| Inrush Values | Voltage | 30 Vdc |
| Current | 6.29 mA max. | |
| Input impedance | 4.9 kΩ | |
| Input type | Sink/Source | |
| Rated voltage | 24 Vdc | |
| Maximum Allowable Voltage | 28.8 Vdc | |
| Input limit values | ON Voltage | 15 Vdc or more (15 to 28.8 Vdc) |
| OFF Voltage | 5 Vdc or less (0 to 5 Vdc) | |
| ON Current | 2.5 mA or more | |
| OFF Current | 1.0 mA or less | |
| Isolation | Method | Photo coupler Isolation |
| Between internal logic | 500 Vdc | |
| Filtering | 0.5 ms x N (N is 0 to 63) | |
| IEC61131-2 edition 3 type | Type 1 | |
| Compatibility | Supports 2 wire and 3 wire sensors | |
| Cable type and length | Shielded: Maximum 100 m (328 ft) Non-shielded: 50 m (164 ft) |
|
| Terminal blocks | Type: 3.5 mm (0.137 in.) pitch Terminal blocks are removable |
|
| Input paralleling | No | |