V812iSN Hakko HMI Monitouch V8
Jual V812iSN Hakko HMI Monitouch V8
HMI Hakko V812iSN Monitouch V8
Hakko HMI V812iSN General Specifications
| V812xSN | V812xSDN | ||
|---|---|---|---|
| V812iSN Power supply |
Rated voltage | 100~240V AC | 24V DC |
| Permissible range of voltage | 100~240V AC±10% | 24V DC±10% | |
| Permissible momentary power failure | Within 20ms | Within 1ms | |
| Demand (maximum rating) | 70VA or less | 30W or less | |
| Inrush current | 20A, 10ms (100V AC) | 30A, 1ms | |
| 40A, 10ms (200V AC) | |||
| Insulation resistance | 500V DC, 10MΩ or more | ||
| V812iSN Physical environment |
Operation ambient temperature | 0°C ~ +50°C | |
| Storage ambient temperature | -10°C ~ +60°C | ||
| Operation ambient humidity | 85%RH or less (without dew condensation, Max. wet bulb temperature: 39°C or lower) *1 | ||
| Resistance to solvent | No attachment of cutting oil or organic solvent | ||
| Atmosphere | Not exposed to corrosive gas or conductive dust | ||
| Operation altitude | 2,000 meter or lower | ||
| Contamination level *2 | Level 2 | ||
| V812iSN Mechanical |
Resistance to oscillation | Vibration frequency: 10–150Hz, acceleration: 9.8m/s2(1.0G) pulsating width: 0.075mm, X,Y,Z: 3 directions 1 hour each way | |
| Resistance to shock | Pulse shape: half-sine, peak acceleration: 147m/s2(15G), X,Y,Z: 3 directions, six times each way | ||
| V812iSN Electric |
Noise proof | 1500Vp-p (pulse width 1 s, pulse rise time : 1ns) | |
| Static discharge | Complies with IEC61000-4-2, contact: 6kV, air: 8kV | ||
| V812iSN Installation conditions |
Grounding | Grounding resistance : Less than 100 Ω, FG/SG separation | |
| Structure | Protect structure: Front panel: Compatible with IP65 (when water-proof gasket is used.) Rear cover: Compatible with IP20 Form: Single unit Installation method: Panel mounting |
||
| Cooling system | Natural air cooling | ||
| Weight | Approx.2.9kg | ||
| Dimensions W×H×D(mm) | 326.4×259.6×69.0 | ||
| Panel cutout (mm) | 313.0×246.2 (+0.5/-0) | ||
| Case color | Gray | ||
| Material | PC/ABS | ||
- *1 Keep wet bulb temperature under 39 to avoid an accident.
- *2 Contamination level is an index that shows the incidence rate of conductive substance. At Level 2, only nonconductive substance is produced, but a temporary conductive state may occur due to dew concentration.
HMI Hakko V812iSN Performance Specifications
| V812iSN Display specifications |
Screen memory | 12.5MB |
|---|---|---|
| Display device | TFT color LCD | |
| Resolution W:H(dots) | 800×600 | |
| Display size | 12.1 inches | |
| Colors | 65,536 colors (without blinks)/ 32,768 colors (with blinks) | |
| Backlight | LED | |
| Backlight Auto OFF | Lit in normal (Set by the user) | |
| Power lamp | Lit in normal condition, blinks in alarm condition such as blowout of backlight bulbs | |
| Contrast adjustment | Fixed | |
| Brilliance control | 3 levels (Adjusted to 128 steps by macro command) | |
| V812iSN Number of characters |
1/4 size | 100 columns × 75 lines |
| 1-byte | 100 columns × 37 lines | |
| 2-byte | 50 columns × 37 lines | |
| Enlargement of characters | X: 1~8 times Y: 1~8 times | |
| V812iSN Touch switch |
Switch resolution | Analog: 1,024×1,024 Matrix: 50×30 |
| Mechanical life | 1 million times or more | |
| Surface treatment | Hard coating, Non glare finish 5% | |
| Function switch | Number of function switches | 8 switches |
| V812iSN External interface |
D-Sub 9 pin (CN1) | RS-232C, RS-422/485, Asynchronous type, Data length : 7,8 bits, Parity : even, odd, none, Stop bit : 1,2 bits, Baud rate : 4800, 9600, 19200, 38400, 57600, 76800, 115200, 187500 *3bps |
| Modular 8 pin (MJ1/ MJ2) | RS-232C, RS-422/485 (two-wire system), Asynchronous type, Data length : 7,8 bits, Parity : even, odd, none, Stop bit : 1,2 bits, Baud rate : 4800, 9600, 19200, 38400, 57600, 76800, 115200bps |
|
| CF card interface | Compatible with CompactFlashTM | |
| Ethernet | Complies with IEEE802.3 Baud rate: 10Mbps, 100Mbps Cable: 100Ω Unsealed twist pair, Category 5, Max length: 100m |
|
| USB | Type A, Type B (Ver1.1) | |
| Clock & Back up memory | Battery | Coin-type lithium primary battery |
| Back up memory | SRAM 512KB | |
| Back up period | 5 years (Ambient temperature 25°C) | |
| Calendar accuracy | Gap±90 sec. per month (Ambient temperature 25°C) |
- *3 Only when connected with SIEMENS MPI