PLC LS XGB Series

Jual PLC LS XGB Series

PLC LS

Jual Panasonic PLC LS XBC /XEC Series | PT. MEGA SARANA INSTRUMEN siap mensuplai Kebutuhan PLC LS Anda dengan harga yang bersaing, bekerjasama dengan distributor PLC LS XBC / XEC  Series di Indonesia Kami siap menjadi Supplier LS di perusahaan anda.

Programmable logic controller (PLC) atau programmable controller

Pengontrol logika terprogram (PLC) adalah sistem kontrol yang menggunakan operasi elektronik. Prosedur penyimpanannya yang mudah, prinsip perluasan yang praktis, fungsi kontrol sekuensial / posisi, penghitungan waktu dan kontrol input / output diterapkan secara luas pada bidang kontrol otomasi industri.

Industri aplikasi utama PLC: industri mesin tekstil mesin tekstil, industri mesin angkat, industri elevator, industri metalurgi, industri tenaga listrik, industri perminyakan dan petrokimia, industri kota, industri kimia, industri konstruksi bangunan, industri bahan bangunan, industri peralatan mesin, mesin plastik, mesin karet, peralatan khusus elektronik, industri otomotif, dll.

 

PLC LS XGB

adalah PLC mikro yang menawarkan kinerja maksimal dengan biaya minimum.
Dengan fungsionalitasnya yang tinggi, XGB mendukung sistem kontrol sederhana hingga tugas kompleks.
Memperkuat fungsi komunikasinya, XGB menawarkan kontrol terintegrasi yang berorientasi pada pengguna.
Berdasarkan kelebihannya, XGB dapat digunakan di banyak bidang aplikasi.

XGB U menetapkan standar baru dalam kinerja Ultimate dengan banyak inovasinya
IoT (Internet of Things) mewujudkan pabrik pintar
XGB-U adalah pengontrol yang berorientasi pengguna

• Compatible with XGB expansion modules
• Max. 2 High speed backplane expansion modules
• Max. 10 expansion modules
• Max. 352 I/O points
• Expansion I/O module
– DC24 input, Transistor output, Relay output
• Special module
– Analog input, Analog output, RTD, Thermocouple, High-speed counter, Positioning
(Line drive 2 axes, EtherCAT network 8 axes)
• Communication modules
– RS-232C, RS-422/485, Ethernet, CANopen (Master/Slave), Profibus-DP (Master/Slave),
DeviceNet (Slave), EtherNet/IP, RAPIEnet

Type PLC LS XGB

  • XBC/XEC-DR10E
  • XBC/XEC-DN10E
  • XBC/XEC-DP10E
  • XBC/XEC-DR14E
  • XBC/XEC-DN14E
  • XBC/XEC-DP14E
  • XBC/XEC-DR20E
  • XBC/XEC-DN20E
  • XBC/XEC-DP20E
  • XBC/XEC-DR30E
  • XBC/XEC-DN30E
  • XBC/XEC-DP30E

PLC LS XGB

Item Specifications (‘E’ type)
XBC/XEC-DR10E
XBC/XEC-DN10E
XBC/XEC-DP10E		 XBC/XEC-DR14E
XBC/XEC-DN14E
XBC/XEC-DP14E		 XBC/XEC-DR20E
XBC/XEC-DN20E
XBC/XEC-DP20E		 XBC/XEC-DR30E
XBC/XEC-DN30E
XBC/XEC-DP30E
Program control method Reiterative operation, Fixed cycle operation
I/O control method Scan synchronized batch processing method (Refresh method)
Direct method by instruction
Program language Ladder Diagram (LD), Sequential Function Chart (SFC)
Structured Text (ST), Instruction List (IL)
Processing speed
(Basic instruction)		 240 ns /step
Program capacity 4 Kstep (XBC-D xxx E), 50 KB (XEC-D xxx E)
Max. I /O points
(Main+Option X )		 14 point
(1 option)		 18 point
(1 option)		 28 point
(2 option)		 38 point
(2 option)
Operation Mode RUN, STOP, DEBUG
Total number of program block 128
Task Initialization 1
Fixed period 8
External input (%I x 0.0.0~%I x 0.0.3)
Internal device 8
Program port RS-232C 1 channel (Loader)
Self – diagnostic functions Watchdog Timer, Memory error detection I/O error detection, etc.
Built -in functions RS-232C or RS-485(1 ch), Pulse catch, Input filter, External interrupt, High-speed counter
Retain data at power failure Latch area setting at basic parameter

Input specification

Specification \ Modal Main unit
XBC/XEC-DR10E
XBC/XEC-DN10E		 XBC/XEC-DR14E
XBC/XEC-DN14E		 XBC/XEC-DR20E
XBC/XEC-DN20E		 XBC/XEC-DR30E
XBC/XEC-DN30E
Input point 6 points 8 points 12 points 18 points
Insulation method Photo coupler insulation
Rated input voltage DC 24V
Rated input current About 4mA (Contact point 0~3: about 7mA)
Operation voltage range DC 20.4~28.8V (Within ripple rate 5%)
On voltage / On current DC 19V or higher / 3mA or higher
Off voltage / Off current DC 6V or lower / 1mA or lower
Input resistance About 5.6kΩ (%Ix0.0.0~%Ix0.0.3: about 2.7kΩ)
Response time Off → On 1/ 3 / 5 / 10 / 20 / 70 / 100ms (Set by I /O parameter) Default: 3ms
On → Off
Insulation pressure AC 560Vrms / 3 cycle (Altitude 2000m)
Insulation resistance 10kΩ or more by MegOhmMeter
Common method 6 points / COM 8 points / COM 12 points / COM 18 points / COM
Proper cable size 0.3mm2
Operation indicator LED On when Input On
External connection method 14 point terminal block connector (M3 6 screw) 24 point terminal block connector (M3 6 screw)
Weight 330g 340g 450g 465g
313g 315g 315g 423g

Relay output specification

Specification \ Modal Main unit
XBC/XEC-DR10E XBC/XEC-DR14E XBC/XEC-DR20E XBC/XEC-DR30E
Output point 4 points 6 points 8 points 12 points
Insulation method Relay insulation
Rated load voltage / Current DC 24V 2A (resistive load) / AC 220V 2A (COSF = 1), 5A / COM
Min. load voltage/ Current DC 5V / 1mA
Max. load voltage AC 250V, DC 125V
Off leakage current 0.1mA (AC 220V, 60Hz)
Max. On/ Off frequency 3,600 times / hour
Surge absorber None
Service life Mechanical 20 million times or more
Electrical Rated load voltage / Current 100,000 times or more
AC 200V / 1.5A, AC 240V / 1A (COØ = 0.7) 100,000 times or more
AC 200V / 1A, AC 240V / 0.5A (COØ = 0.35) 100,000 times or more
DC 24V / 1A, DC 100V / 0.1A (L / R = 7ms) 100,000 times or more
Response time Off → On 10ms or less
On → Off 12ms or less
Common method 2 points / COM 4 points / COM 4 points / COM 4 points / COM
Proper cable size Stranded cable 0.3~0.75mm2 (External diameter 2.8mm or less)
Operation indicator LED On when Output On
External connection method 14 point terminal block connector (M3 x 6 screw) 24 point terminal block connector (M3 x 6 screw)

Transistor output specification (Sink/Source type)

Specification \ Modal Main unit
XBC/XEC-DN10E
XBC/XEC-DP10E		 XBC/XEC-DN14E
XBC/XEC-DP14E		 XBC/XEC-DN20E
XBC/XEC-DP20E		 XBC/XEC-DN30E
XBC/XEC-DP30E
Output point 4 points 6 points 8 points 12 points
Insulation method Photo coupler insulation
Rated load voltage DC 12/24V
Operation load voltage range DC 10.2~26.4V
Max. load current 0.5A/1 point, 2A/1COM
Off leakage current 0.1mA or less
Max. inrush current 4A/10ms or less
Max. voltage drop when On DC 0.4V or less
Surge absorber Zener diode
Response time Off → On 1ms less
On → Off 1ms less (Rated load, resistive load)
Common method 4 point / COM
Proper wire size Stranded wire 0.3~0.75mm2 (External diameter 2.8mm or less)
External power Voltage DC 12/24V ± 10% (Ripple voltage 4 Vp-p or less)
Current 25mA or less (When connecting DC 24V)
Operation indicator LED On when Output On
External connection method 14 point terminal block connector (M3 x 6 screw) 24 point terminal block connector (M3 x 6 screw)

Option I/O

XBO-RTCA RTC (Real Time Clock), Battery XBO-AD02A Voltage/Current, Input 2ch
XBO-DC04A DC 24V Input 4 points XBO-DA02A Voltage/Current, Output 2ch
XBO-TN04A Transistor (Sink) Output 4 points XBO-AH02A Voltage/Current, Input 1ch
Voltage/Current, Output 1ch
XBO-RD01A RTD(Resistance Temperature Detect), Input 1ch XBO-TC02A TC (Thermocouple), Input 2ch

* High speed counter and positioning functions are available in XBO-DC04A and XBO-TN04A, respectively with XGB standard type.

PLC LS XGB Series yang kami jual adalah barang baru original serta bergaransi, hubungi kami untuk mendapatkan penawaran terbaik.

PLC Lainnya

Unduh Katalog PLC LS