• Fuji Electric, HMI, HMI Hakko
• Distributor Fuji Indonesia, Distributor HMI Fuji Indonesia, Distributor HMI Hakko Indonesia, Fuji Electric Indonesia, Hakko, Hakko Indonesia, HMI Fuji, HMI Fuji Indonesia, HMI Hakko Indonesia

Jual V815iXN Hakko HMI Monitouch V8

Jual V815iXN Hakko HMI Monitouch V8 

HMI Hakko V815iXN General Specifications

		V815iXN	V815iXDN
V815iXN Power supply	Rated voltage	AC100~240V	DC24V
	Permissible range of voltage	AC100~240V±10%	DC24V±10%
	Permissible momentary power failure	Within 20ms	Within 1ms
	Demand (maximum rating)	90VA or less	40W or less
	Inrush current	20A,10ms(AC100V)	30A,1ms
		40A,10ms(AC200V)
Insulation resistance		DC500V 10MΩ or more
V815iXN Physical environment	Operation ambient temperature	0°C ~ +40°C
	Storage ambient temperature	-10°C ~ +50°C
	Operation ambient humidity	85%RH or less (without dew condensation, Max. wet bulb temperature: 39°C or lower) *1
	Atmosphere	Not exposed to corrosive gas or conductive dust
	Operation altitude	2,000 meter or lower
	Contamination level *2	Level 2
V815iXN Mechanical	Resistance to oscillation	Vibration frequency: 10–150Hz, acceleration: 9.8m/s 2(1.0G) pulsating width: 0.075mm, X,Y,Z: 3 directions 1 hour each way
	Resistance to shock	Pulse shape: half-sine, peak acceleration: 147m/s 2(15G), X,Y,Z: 3 directions, six times each way
V815iXN Electric	Noise proof	1500Vp-p (pulse width 1 s, pulse rise time : 1ns)	1000Vp-p (pulse width 1 s, pulse rise time : 1ns)
	Static discharge	Complies with IEC61000-4-2, contact: 6kV, air: 8kV
V815iXN Installation conditions	Grounding	Grounding resistance : Less than 100 Ω, FG/SG separation
	Structure	Protect structure: Front panel: Compatible with IP65 (when water-proof gasket is used.) Rear cover: Compatible with IP20 Form: Single unit Installation method: Panel mounting
	Cooling system	Natural air cooling
	Weight	Approx.5.5kg	Approx.5.3kg
	Dimensions W×H×D(mm)	382.8×312.8×81.1
	Panel cutout (mm)	369.4×299.4(+0.5/-0)
Material		Aluminum

• *1 Keep wet bulb temperature under 39°C to avoid an accident.
• *2 Contamination level is an index that shows the incidence rate of conductive substance. At Level 2, only nonconductive substance is produced, but a temporary conductive state may occur due to dew concentration.

HMI Hakko V815iXN Performance Specifications

V815iXN Display specifications	Screen memory	12.5MB
	Display device	TFT color LCD
	Resolution W:H(dots)	1024×768
	Display size	15 inches
	Colors	65,536 colors (without blinks)/ 32,768 colors (with blinks)
	Backlight	LED
	Backlight Auto OFF	Lit in normal (Set by the user)
	Power lamp	Lit in normal condition, blinks in alarm condition such as blowout of backlight bulbs
	Contrast adjustment	Fixed
	Brilliance control	3 levels (Adjusted to 128 steps by macro command)
V815iXN Number of characters	1/4 size	127 columns × 96 lines
	1-byte	127 columns × 48 lines
	2-byte	64 columns × 48 lines
Enlargement of characters		X: 1–8 times Y: 1–8 times
Touch switch	Switch resolution	Analog: 1,024×1,024
	Mechanical life	1 million times or more
	Surface treatment	Hard coating, Non glare finish 5%
Function switch	Number of function switches	8 switches
V815iXN External interface	D-Sub 9-pin (CN1)	RS-232C, RS-422/485, Asynchronous type, Data length : 7,8 bits, Parity : even, odd, none, Stop bit : 1,2 bits, Baud rate : 4800, 9600, 19200, 38400, 57600, 76800, 115200, 187500 *3bps
	Modular 8-pin (MJ1/ MJ2)	RS-232C, RS-422/485 (two-wire system), Asynchronous type, Data length : 7,8 bits, Parity : even, odd, none, Stop bit : 1,2 bits, Baud rate : 4800, 9600, 19200, 38400, 57600, 76800, 115200bps
	CF card interface	Compatible with CompactFlash TM
	Ethernet	Complies with IEEE802.3 Baud rate: 10Mbps, 100Mbps Cable: 100Ω Unsealed twist pair, Category 5, Max length: 100m
	USB	Type A, Type B (Ver1.1)
Clock & Back up memory	Battery	Coin-type lithium primary battery
	Back up memory	SRAM 512KB
	Back up period	5 years (Ambient temperature at 25°C)
	Calendar accuracy	Gap±90 sec. per month (Ambient temperature at 25°C)

• *3 Only when connected with SIEMENS MPI

HMI Hakko Lainnya