MBDDT2210 Panasonic Servo Driver
Jual Panasonic Servo Driver MBDDT2210
Panasonic Servo Driver MBDDT2210 | Panasonic MBDDT2210 Servo Driver Seri Minas A4 yang masi banyak digunakan dan kami juga dapat mensuply Seri Minas A5 MBDKT2510 sebagai penerus dari Servo Drive Panasonic Seri Minas A4 yang sudah habis masa produksinya. Dengan berbagai penyempurnaan dari seri pendahulunya.
Mengakomodasi perintah resolusi pemosisian terdepan di industri (dengan perintah rangkaian pulsa).
Input perintah dan output umpan balik beroperasi pada kecepatan tinggi 4 Mpps. Mengakomodasi operasi resolusi tinggi dan kecepatan tinggi, termasuk operasi standar penuh tertutup.
(Hanya tersedia dengan A5Ⅱ, A5.)
Pulsa Input / Output 4 Mpps
Panasonic Servo Driver MBDDT2210 Spec Detail
| Item | Specifications |
|---|---|
| Part Number | MBDDT2210 |
| Details | A4 Series Standard model Pulse train position command Analog velocity command Analog torque command Full-closed control serial communication |
| Family Name | MINAS A4 |
| Series | A4 series |
| Frame | B-Frame |
| Frequency response | 1.0 kHz |
| Control method | Position, Speed, Totque, Full-closed control, Serial communication |
| Safety Function | without the safety function |
| I/F Classification of type | Analog / Pulse input |
| Dimensions (W) (Unit: mm) | 55 |
| Dimensions (H) (Unit: mm) | 150 |
| Dimensions (D) (Unit: mm) | 130 |
| Mass (kg) | 1.1 |
| Environment | For more details, please refer to the instruction manual. |
Panasonic Servo Driver MBDDT2210 Basic Specifications
| Item | Specifications |
|---|---|
| Input power: Main circuit | Single phase 200 to 240V +10% -15% 50/60 Hz |
| Input power: Control circuit | Single phase 200 to 240V +10% -15% 50/60 Hz |
| Encoder feedback | 17 bit (131072 resolution) absolute/incremental encoder 2500 P/r (10000 resolution) incremental encoder |
| About Encoder feedback | * When using it as an incremental system (not using multiturn data), do not connect the battery for absolute encoder. Parameter Pr. 0B must be set to “1” (factory settings). |
| External scale feedback | Serial communication |
| Parallel I/O connector: Control signal Input |
10 inputs (1) Servo-ON, (2) Control mode switching, (3) Gain switching/Torque limit switching, (4) Alarm clear, (5)CW over-travel inhibit, (6)CCW over-travel inhibit. Other inputs vary depending on the control mode. |
| Parallel I/O connector: Control signal Output |
6 outputs (1) Servo alarm, (2) Servo ready, (3) Release signal of external brake (4) Zero speed detection, (5) Torque in-limit. Other outputs vary depending on the control mode. |
| Parallel I/O connector: Analog signal Input |
3 inputs (16 bit A/D : 1 inputs、10 bit A/D : 2 inputs) |
| Parallel I/O connector: Analog signal Output |
2 outputs (for monitoring) (1) Speed monitor (Monitoring of actual motor speed or command speed is enabled. Select the content and scale with parameter.), (2) Torque monitor (Monitoring of torque command, [approx. 3V/rated torque]), deviation counter or full-closed deviation is enabled. Select the content or scale with parameter.) |
| Parallel I/O connector: Pulse signal Input |
2 inputs Select the exclusive input for line driver or photo-coupler input with parameter. |
| Parallel I/O connector: Pulse signal Output |
4 outputs Feed out the encoder pulse (A, B and Z-phase) or feedback scale pulse (EXA, EXB and EXZ-phase) in line driver. Z-phase and EXZ-phase pulse is also feed out in open collector. |
| Communication function | RS232, RS485 |
| Communication function: RS232 | 1 : 1 communication to a host with RS232 interface is enabled. |
| Communication function: RS485 | 1 : n communication up to 15 axes to a host with RS485 interface is enabled. |
| Regeneration | No built-in regenerative resistor (external resistor only) |
| Control mode | Switching among the following 7 mode is enabled, (1) Position control, (2) Speed control, (3) Toque control, (4) Position/Speed control, (5) Position/Torque control, (6) Velocity/Torque control and (7) Full-closed control. |
MADHT
MBDHT
MCDHT
MDDHT
MEDHT
MFDHT
MFDHTA
MFDHTB
MGDHTB
MHDHTB
MHDHTC
Panasonic Servo Driver MEDKT7364 dan Seri Minas A5 Lainnya
MADKT
MBDKT
MCDKT
MDDKT
MEDKT
MFDKT
MFDKTA
MGDKTB
MHDKTC
Panasonic Servo Driver MEDKT7364 Panasonic Seri Minas A5e
MADHT
MBDHT
Panasonic MCDHT3520
MDDHT
MEDHT
MFDHT
MFDHTA
MFDHTB
Panasonic Servo Driver MEDKT7364 & Seri Minas A5IIe
MADKT
MBDKT
MCDKT
MDDKT
MEDKT
MFDKT
MFDKTA
MFDKTB
Produk Servo Driver Panasonic MBDDT2210 yang kami jual adalah barang baru dan bergaransi resmi, silahkan Hubungi Tim marketing kami yang siap membantu untuk info lebih lanjut dan juga untuk mengetahui info harga dan stok Servo Motor Panasonic MBDDT2210 atau produk kami lainnya.
Servo Panasonic Type Lainnya
Servo Lainnya
Downloag Katalog Panasonic MBDDT2210