AFP0HC32T PLC Panasonic
Jual AFP0HC32T PLC Panasonic
Jual Panasonic PLC FP0H Series
Jual Panasonic PLC AFP0HC32T Series | PT. MEGA SARANA INSTRUMEN siap mensuplai Kebutuhan PLC Panasonic Anda dengan harga yang bersaing, bekerjasama dengan distributor Panasonic di Indonesia Kami siap menjadi Supplier Panasonic di perusahaan anda.
Type PLC Panasonic :
- PLC Panasonic FP0H Series
- PLC Panasonic FP-Sigma
- PLC Panasonic FP0R Ultra Compact
- PLC Panasonic FP-X0
- PLC Panasonic FP-XH
- PLC Panasonic FP-X
Jual Panasonic PLC AFP0HC32T Series Kecepatan tinggi dan kapasitas tinggi
Berkat dua port Ethernet, Panasonic FP0H dapat diintegrasikan secara langsung tanpa sakelar. Dengan kecepatan pemrosesan yang hanya 10ns per langkah, Panasonic FP0H sangatlah cepat. Berkat memori programnya yang besar, PLC berkinerja tinggi dapat memproses hingga 64k langkah. Desain yang ringkas membuat Panasonic FP0H cocok untuk berbagai macam aplikasi. Pengontrol terprogram telah terbukti sempurna untuk bidang aplikasi yang menuntut seperti telekontrol.
Panasonic AFP0HC32T
-
Kecepatan tinggi dan kapasitas tinggi
FP0H 8 kali lebih cepat daripada model konvensional dan hanya membutuhkan 10ns per instruksi dasar (hingga 10k langkah). Dengan max. Langkah 64k, kapasitas program 2 kali lebih besar dari model konvensional. Memori bersama dapat dialokasikan ke program dan register data melalui register sistem. Dengan cara ini, dimungkinkan untuk mengalokasikan misalnya 64k kata ke register data ketika ada sejumlah besar data log atau 64k langkah ke memori program ketika ada sejumlah besar program.
-
Dapat diperluas hingga 384 input / output dengan unit ekspansi
FP0H dilengkapi dengan 16 masukan dan 16 keluaran transistor (sink / source). Nomor I / O dapat diperluas hingga 384 I / O dengan unit ekspansi FP0H / FPe / FP0R.
-
Panasonic AFP0HC32T dengan Konektivitas tinggi
Antarmuka yang tersedia: 2 port Ethernet (hanya tipe Ethernet), 1 port RS232C, 1 port USB. Jenis Ethernet kompatibel dengan EtherNet / IP, Modbus-TCP dan protokol MC dan dapat dihubungkan dengan mudah ke semua jenis robot dan PLC. Selain itu, kaset komunikasi dapat dipasang.
Penghematan biaya
Sistem kaset komunikasi memperluas fungsionalitas komunikasi serial dari CPU tanpa perlu membeli atau memasang unit komunikasi khusus. Ada 4 kaset komunikasi yang tersedia: RS232C, RS232C x 2, RS485, RS232C dan RS485. Selain itu, program bersama dan memori register data berarti tidak perlu membeli unit yang lebih mahal dengan ruang data yang lebih banyak. -
Panasonic AFP0HC32T dengan Kompatibilitas tinggi
FPΣ (Sigma) dan FP0H tanpa fungsi Ethernet memiliki ukuran yang hampir sama sehingga mudah untuk mengganti FPΣ (Sigma) dengan FP0H. Program tangga yang ditulis untuk FPΣ (Sigma) dapat diubah menjadi FP0H untuk memfasilitasi penggantian.
-
Slot kartu memori SD untuk fungsi logging / trace (hanya tipe Ethernet)
Kartu memori SD dapat digunakan untuk menyimpan program untuk dan dari PLC. Ini membuatnya mudah untuk memperbarui program dengan cepat jika perlu. Selain itu, mereka dapat digunakan untuk fungsi logging / trace. Logging dapat dilakukan dengan 4 file aktif secara bersamaan menggunakan berbagai pemicu seperti bit, interval, instruksi, dan waktu.
-
Kontrol motorik
Unit kontrol dapat mengontrol empat sumbu dengan output pulsa (hingga 100kHz per sumbu), sehingga kontrol tabel X-Y 2 sumbu dapat dilakukan secara bersamaan. Alat konfigurasi menawarkan tabel pemosisian untuk memudahkan pengaturan parameter jumlah gerakan, kecepatan target, waktu akselerasi dan perlambatan, mode operasi, dll. Untuk setiap sumbu, parameter ditampilkan untuk logika input batas, waktu perlambatan untuk berhenti, dan kondisi operasi untuk operasi JOG dan pulang ke rumah, dll.
-
Panasonic AFP0HC32T Mendukung unit pemosisian FPΣ (Sigma) RTEX
FP0H mendukung tiga jenis unit pemosisian FPΣ (Sigma) RTEX yang tersedia untuk mengontrol 2 sumbu, 4 sumbu dan 8 sumbu. Unit positioning RTEX dapat digunakan dengan driver servo MINAS A5IIN / A6N untuk kontrol posisi multi-sumbu yang tepat. Perangkat lunak pengaturan PM Configurator mendukung pengguna dari konfigurasi untuk memulai dan memantau sistem. Anda dapat memeriksa tindakan pemosisian dengan bantuan uji coba bahkan ketika unit kontrol dalam mode program.
Jual Seri Panasonic PLC AFP0HC32T :
- AFP0HXY64D
- AFP0HXY64D
- AFP0HM4N
- AFP0HM8N
- AFP0HPG01T
- AFP0HPG02T
- AFP0HPG01L
- AFP0HPG02L
- AFP0HCCS1
- AFP0HCCS2
- AFP0HCCM1
- AFP0HCCS1M1
Spec Detail
| Item | Specifications |
|---|---|
| Product Number | AFP0HC32T |
| Part Number | AFP0HC32T |
AFP0HC32T Control specifications
| Item | Specifications | ||||
|---|---|---|---|---|---|
| Number of controllable I/O points | 32 points (Input: 16, Output: 16), When expanded: Max. 384 points | ||||
| Programming method / Control method | Relay symbol / Cyclic operation | ||||
| Program memory | Built-in flash ROM (no backup battery required) | ||||
| Number of instructions : Basic instructions | 120 types approx. | ||||
| Number of instructions : High-level instructions | 240 types approx. | ||||
| Program capacity | 24 k /32 k steps Can be selected at system register No. 0 When the program capacity is changed, the number of words that can be used in the data register (DT) is also changed.
|
||||
| Operation speed | Basic instruction (NOT: /) : 10 ns/step approx. (Up to 10 k steps) ,0.18 μs/step approx. (10 k steps and later) Basic instruction (ST) : 40 ns/step approx. (Up to 10 k steps) ,0.65 μs/step approx. (10 k steps and later) High-level instruction (FOMV) : 0.14 μs/step approx. (Up to 10 k steps) , 1.2 μs/step approx. (10 k steps and later) |
||||
| Base scan time I/O refresh and base time |
Control unit: 40 μs or less approx. and FP0 / FP0R expanshion unit refresh time (Note) Note : Refresh times for FP0 / FP0R expansion units 8 points unit : Number of units×0.8ms 16 points unit : Number of units×1.0ms 32 points unit : Number of units×1.3ms 64 points unit : Number of units×1.9ms |
||||
| Operation memory : Relay : External input (X) | 1, 760 points (X0 to X109F)(Note 1, 2) Note 1 : The number of points that can be used depends on the combination of hardware. Note 2 : Some specifications are compatible with FPΣ. |
||||
| Operation memory : Relay : External output (Y) | 1, 760 points (X0 to X109F)(Note 1, 2) Note 1 : The number of points that can be used depends on the combination of hardware. Note 2 : Some specifications are compatible with FPΣ. |
||||
| Operation memory : Relay : Internal relay (R) | 4,096 points (R0 to R255F) or 8,192 points (R0 to R511F) (Note 1,2) Note 1 : Some specifications are compatible with FPΣ. Note 2 : System register No. 1 (internal relay capacity) can be configured to select “0: 4,096 points / 1: 8,192 points”. |
||||
| Operation memory : Relay : Special internal relay (R) | 800 points (R9000 to R951F) | ||||
| Operation memory : Relay : Timer / Counter (T / C) | 1,024 points (initial setting, timer: 1,008 points, counter: 16 points)(Note) Note : An auxiliary timer instruction (F137) can be used to add the number of points. |
||||
| Operation memory : Relay : Link relay (L) | 2,048 points (L0 to L127F) | ||||
| Operation memory : Memory area : Data register (DT) | 32,765 words or 65,533 words(Note) Note : System register No. 0 (program capacity) can be configured to select the capacity of the data register (DT). |
||||
| Operation memory : Memory area : Special data register (DT) | 1,000 words (DT90000 to DT90999)(Note) Note : Some specifications are compatible with FPΣ. |
||||
| Operation memory : Memory area : Link data register (LD) | 256 words (LD0 to LD255) | ||||
| Operation memory : Memory area : Index register (I) | 14 words (I0 to ID) | ||||
| Differential points | Points for the program capacity | ||||
| Number of master control relay (MCR) | 256 points | ||||
| Number of labels (JP and LOOP) | 256 points | ||||
| Number of step ladders | 1,000 stages | ||||
| Number of subroutines | 500 subroutines | ||||
| Number of interrupt program | 9 programs •Input: 8 programs (INT0 to INT7) •Periodic: 1 program (INT24) |
||||
| Sampling trace | Available(Note) [Sampling by commands / Sampling at regular time intervals (For one sampling: 16 bits + 3 words), 1,000 samples] Note : Logging trace and sampling trace cannot be used at the same time. |
||||
| Comment storage | I/O comments, remarks and block comments can be stored. (no backup battery required, 1 M byte) |
||||
| PLC link function (Serial communication) |
Max. 16 units, link relays: 1,024 points, link registers: 128 words. (Data transfer and remote programming are not supported) |
||||
| Constant scan | Available (0 to 600 ms) | ||||
| Password | Available (32 digits) | ||||
| Program upload protection | Available | ||||
| Program protect function | Available | ||||
| Self-diagnosis function | Watchdog timer, program syntax check, etc. | ||||
| Program edition during RUN | Available | ||||
| SD memory card function | – | ||||
| Memory transfer | Available [Built-in memory (ROM ⇔ RAM)] | ||||
| High speed counter : Main unit input | Single-phase 4 channels (Max. 100 kHz each input) or 2-phase 2 channels (Max. 50 kHz each input)(Note) Note : The specifications are based on the rated input voltage of 24 V DC at +25 ℃ +77 ℉. The maximum operation frequency may be lower depending on the applied voltage, ambient temperature, and conditions of use. The maximum operation frequency varies depending on how the unit is used. |
||||
| Pulse output : Main unit output | 4 channels (Max. 100 kHz each axis)(Note) Note : The specifications are based on the rated input voltage of 24 V DC at +25 ℃ +77 ℉. The maximum operation frequency may be lower depending on the applied voltage, ambient temperature, and conditions of use. The maximum operation frequency varies depending on how the unit is used. |
||||
| PWM output : Main unit output | 4 channels (1 Hz to 70 kHz: 1,000 resolution / 70.001 kHz to 100 kHz: 100 resolution(Note) Note : The specifications are based on the rated input voltage of 24 V DC at +25 ℃ +77 ℉. The maximum operation frequency may be lower depending on the applied voltage, ambient temperature, and conditions of use. The maximum operation frequency varies depending on how the unit is used. |
||||
| Pulse catch input Interrupt input |
Total 8 points (with high speed counter) | ||||
| Periodical interrupt | 0.1 ms to 30 sec. | ||||
| Potentiometer (Volume) input | 2 channels (0 to 4000) | ||||
| Clock / calendar | Year (last two digits), month, day, hour (24-hour display), minute, second and day of week(Note 1, 2) Note 1 : Accuracy of the clock / calendar (within ± 90 seconds per month at +25 ℃ +77 ℉).If an error of the clock / calendar becomes a problem in the system, set an accurate time periodically. Note 2 : If the battery is not attached, calendar information is cleared when the power is turned off. It will be necessary to set the date when the power is turned on. |
||||
| Memory backup : Backup by instruction P13 | Data register: all area(Note) Note : Data can be rewritten up to 10,000 times. Hold / non-hold areas can be specified in the system registers. |
||||
| Memory backup : Auto-backup at power failure | Counter: 16 points Internal relay: 128 points Data register: 315 words Note : Data can be rewritten up to 10,000 times. Hold / non-hold areas can be specified in the system registers. |
||||
| Battery backup (only when a battery is installed) | Hold areas or non-hold areas can be specified by setting the system registers No.6 to No. 13. (It is also possible to make the setting for hold all points.) |
||||
| Battery life | 5 years or more under a production condition (operates for 8 hours per day) |
AFP0HC32T General specifications
| Item | Specifications |
|---|---|
| CE marking directive compliance | EMC Directive, RoHS Directive |
| Rated voltage | 24 V DC |
| Operating voltage range | 20.4 to 28.8 V DC |
| Current consumption | 140 mA or less |
| Allowed momentary power off time | 4 ms (at 20.4 V DC), 10 ms (24 V DC or higher) |
| Operating temperature | 0 to +55 ℃ +32 to +131 ℉, At storage: -40 to +70 ℃ – 40 to +158 ℉ |
| Operating humidity | 10 to 95 % RH (at +25 ℃ +77 ℉, no dew condensation allowed), At storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no dew condensation allowed) |
| Withstand voltage | (Detection current: 5 mA) 500 V AC for 1 minute Input and output terminals ⇔ power and functional ground terminals Input terminals ⇔ Output terminals |
| Insulation resistance | (Test voltage: 500 V DC) 100 MΩ or more Input and output terminals ⇔ power and functional ground terminals Input terminals ⇔ Output terminals |
| Vibration resistance | 5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, for 10 times each in X, Y, and Z directions (1 octave/min.) (JIS B 3502, IEC 61131-2) |
| Shock resistance | 147 m/s2, 4 times each in X, Y, and Z directions (JIS B 3502, IEC 61131-2) |
| Noise resistance | 1,000 V (p-p) with pulse widths 50 ns and 1 μs (using a noise simulator) (Power supply terminal) |
| Operating condition | Free from corrosive gasses and excessive dust |
| Overvoltage class | Category II |
| Level of contamination | Pollution level 2 |
| Net weight | 110 g approx. |
AFP0HC32T COM0 port communication specifications
| Item | Specifications |
|---|---|
| Interface | RS-232C, three-wire system, 1 channel (Not insulated) |
| Transmission distance | 15 m 49.213 ft |
| Communication configuration | 1 : 1 communication |
| Communication method | Half-duplex system |
| Synchronous method | Start-stop synchronization system |
| Transmission cable | Multi-conductor shielded wire |
| Communication speed (Specified at the system registers) |
1,200(Note), 2,400(Note), 4,800, 9,600, 19,200, 38,400, 57,600, 115,200, 230,400 bits/sec. Note : System register no. 415 cannot be used to set the baud rate to 1,200 bps. To set the baud rate to 1,200 bps, use the SYS1 instruction. If the baud rate of any of the COM ports is 2,400 bps or lower, F-ROM access will slow down. Example) F12(ICRD) instruction, P13(ICWT) instruction, etc. |
| Transmission format : Data length | 7 bits / 8 bits |
| Transmission format : Parity | none / odd / even |
| Transmission format : Stop bit | 1 bit / 2 bits |
| Transmission format : Start code | with STX / without STX |
| Transmission format : End code | CR / CR + LF / none / ETX / Time (0 to 100.00 ms) |
| Data transmission order | Transmit from bit 0 in character units |
| Communication mode | MEWTOCOL-COM (Master / Slave) (Computer link) General-purpose communication PLC link MODBUS RTU (Master / Slave) |
| Remark | The start and end codes can be used only for general-purpose serial communications. The unit No. (station number) can be selected at system register No. 410. |
AFP0HC32T USB port specifications
| Item | Specifications |
|---|---|
| Standard | USB2.0 Full speed (USB mini B type) |
| Communication function | Computer link (slave) |
Dedicated power supply output port specifications for GT series programmable display
| Item | Specifications |
|---|---|
| Terminal:5V | Connecting programmable display model : For 5 V DC type GT02 series Programmable Display |
AFP0HC32T Input specifications
| Item | Specifications |
|---|---|
| Rated input voltage | 24 V DC |
| Applied voltage range | 21.6 to 26.4 V DC |
| Rated input current | High-speed part (X0 to X7) : 8 mA approx. Low-speed part (X8 to XF) : 3.5 mA approx. |
| Input points per common | 16 points/common (Either the positive or negative of the input power supply can be connected to the common terminal.) |
| Min. ON voltage / Min. ON current | High-speed part (X0 to X7) : 19.2 V DC / 6 mA Low-speed part (X8 to XF) : 19.2 V DC / 3 mA |
| Max. OFF voltage / Max. OFF current | 2.4 V DC / 1 mA |
| Input impedance | High-speed part (X0 to X7) : 3 kΩ approx. Low-speed part (X8 to XF) : 6.8 kΩ approx. |
| Response time : OFF→ON | <High-speed part (X0 to X7)> 135 μs or less: normal input 5 μs or less: high speed counter, pulse catch, interrupt input settings <Low-speed part (X8 to XF)> 1 ms or less: normal input only Note: The input time constant (0.1 to 256 ms) can be specified. |
| Response time : ON→OFF | Same as above |
| Action indicator | LED display |
AFP0HC32T Output specifications
| Item | Specifications |
|---|---|
| Output type | Nch open drain |
| Rated load voltage | 5 to 24 V DC |
| Load voltage allowable range | 4.75 to 26.4 V DC |
| Rated load current | 0.3 A (For Y0, Y1, Y3, Y4, Y8,Y9, YB,YC), 0.1 A (For Y2, Y5, Y6, Y7, YA, YD, YE, YF) |
| Max. surge current | High-speed part (For Y0, Y1, Y3, Y4, Y8, Y9, YB, YC) : 1.0 A, Low-speed part (For Y2, Y5, Y6, Y7, YA, YD, YE, YF) : 0.5 A |
| OFF state leakage current | 110 μA or less |
| ON state voltage drop | 0.5 V DC or less |
| Overcurrent protection | Provided (automatically protected for each 8 points) |
| Output points per common | 16 points/common (Y0 to YF / 1 common) |
| Response time : OFF→ON | High-speed part (For Y0, Y1, Y3, Y4, Y8, Y9, YB, YC) : 2 μs or less, Low-speed part (For Y2, Y5, Y6, Y7, YA, YD, YE, YF) : 1 ms or less |
| Response time : ON→OFF | High-speed part (For Y0, Y1, Y3, Y4, Y8, Y9, YB, YC) : 5 μs or less, Low-speed part (For Y2, Y5, Y6, Y7, YA, YD, YE, YF) : 1 ms or less |
| Surge absorber | Zener diode |
| Operating mode indicator | LED display |
AFP0HC32T Current consumption
| Item | Specifications |
|---|---|
| Current consumption | Refer to “FP0H Specifications – Current consumption” for the current consumption |
Unduh Katalog PLC Panasonic AFP0HC32T