• Fuji Electric, HMI, HMI Hakko
• Distributor Fuji Indonesia, Distributor HMI Fuji Indonesia, Distributor HMI Hakko Indonesia, Fuji Electric Indonesia, Hakko Indonesia, HMI Fuji Indonesia, HMI Hakko Indonesia

Jual HMI Hakko V9080iSD Fuji Electric Monitouch

Jual HMI Hakko V9080ISD Fuji Electric Monitouch | 

V9 Advanced Lineup

V9101iW series

• V9101iWLD
• V9101iWRLD

V9071iW series

• V9071iWLD
• V9071iWRLD

V9 Standard Lineup

V9150iX series

• V9150iXD

V9120iS series

• V9120iSD
• V9120iSB
• V9120iSDB

V9100iS series

• V9100iSD
• V9100iSB

V9080iS series

• V9080iSD
• V9080iSBD

 

V9 Lite Lineup

V9100iC series

• V9100iCD
• V9100iCB
• V9100iCBD

V9080iC series

• V9080iCD
• V9080iCBD

V9060iT series

• V9060iTD
• V9060iTBD

Dimensions and Part Names

		V9080iSD
V9080ISD Power supply	Rated voltage	DC24V
	Permissible range of voltage	±10％
	Permissible momentary power failure	within 1ms
	Demand (maximum rating)	28Ｗ or less
Insulation resistance		DC500V 10MΩ or more
V9080ISD Physical environment	Ambient temperature	0～50℃ *1
	Ambient humidity	85%RH or less (without dew condensation) *1
	Operation altitude	2,000 meters or lower
	Atmosphere	Not to be exposed to corrosive gas, or conductive dust
	Storage temperature	-10～60℃ *1
	Storage humidity	85%RH or less (without dew condensation) *1
	Overvoltage category	Category II
	Pollution degree	Pollution degree 2
Mechanical operating conditions	Resistance to oscillation	Complies with JIS B 3502 (IEC61131-2) Vibration frequency: 5̃9Hz, pulsating with:3.5mm, 9̃150Hz, Acceleration: 9.8m/s2(1G),X,Y,Z: 3 directions (10 times each)
	Resistance to shock	Complies with JIS B 3502 (IEC61131-2) Peak acceleration: 147m/s2(15G), X,Y,Z: 3 directions, three times each (18 times in total)
V9080ISD Electric operating conditions	Resistance to noise	Noise voltage: 1,500Vp-p, pulse width: 1μs, pulse rise time: 1ns
	Resistance to static discharge	Complies with IEC61000-4-2, contact: 6kV, air: 8kV
V9080ISD Installation conditions	Grounding	Grounding resistance: Less than 100Ω, FG/SG separation
	Structure	Protection structure: Front case: IP66, Type 4X/13 *2(when water-proof gasket is used), Rear case: IP20, single unit, installation method: panel mounting
	Cooling system	Natural air cooling
	Dimensions W*H*D(mm)	235.0×180.0×48.9
	Panel cutout (mm)	220.5×165.5（+0.5/-0）
Case color		Light gray (black front housing for black model)
Material		PC resin

• *1: Use at a wet-bulb temperature of 39°C or less because higher temperatures may cause failure.

HMI Hakko V9080ISD Performance Specifications

Screen memory (FROM)		64MB
Backup memory (SRAM)		800KB
V9080ISD Display	Display device	TFT color LCD
	Resolution	800×600
	Display size	8.4″
	Colors	16.7 million*3
	Backlight	LED
	Backlight life	70,000 hours
V9080ISD Touch switch	Type	Analog resistance film
V9080ISD Function switch	Quantity	8
V9080ISD External interface	D-Sub 9-pin (CN1)	RS-232C/ RS-485(2-wire system)/ RS-422(4-wire system), Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200, 187500 *4bps
	Modular 8-pin （MJ1/MJ2）	RS-232C/ RS-485(2-wire system), Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200 bps
	SD card	One card slot provided as standard
	Ethernet	1ch, Baud rate: 100Mbps, 10Mbps
	Wireless LAN *5	Complies with IEEE802.11b/g/n (2.4GHz)
	USB	Type A,Type mini-B(Ver.2.0)
	Sound output	1ch provided as standard
V9080ISD Clock	Backup period	5 years (Ambient temperature 25°C)
	Calendar accuracy	Gap ±90 sec. per month (Ambient temperature 25°C, when power is not supplied)
V9080ISD Standard	CE marking	EN61000-6-2、EN61000-6-4、EN50581 *7
	UL･cUL	UL61010-1、UL61010-2-201 *6、ANSI/ISA 12.12.01 *2
	KC *7*8	Compliant
	Radio Act *5	Japan: TELEC
Classification Standard *7*9		Nippon Kaiji Kyokai (NK) American Bureau of Shipping (ABS) Lloyd’s Register of Shipping (LR) Det Norske Veritas (DNV)

• *2: Hardware of Ver. b or later.
• *3: For displaying pictures, 3D parts,video, and RGB input (excluding high-speed mode) only. Other parts are displayed in 65,536 colors.
• *4: Only for Siemens MPI (Incompatible with DUR-00).
• *5: Wireless LAN-compatible products only.
• *6: Only for Hardware Ver. f or later. Applicable standard for Hardware Ver. a to e is UL 508.
• *7: Wireless LAN compatible products are not supported.
• *8: Black model not certified
• *9: Hardware Ver. c or higher.

HMI Hakko Lainnya