• Fuji Electric, HMI, HMI Hakko
• Distributor Fuji Indonesia, Distributor HMI Fuji Indonesia, Distributor HMI Hakko Indonesia, Fuji Electric Indonesia, Hakko, Hakko Indonesia, HMI Fuji, HMI Fuji Indonesia, HMI Hakko Indonesia

Jual HMI Hakko V9100iSB Fuji Electric Monitouch

Jual HMI Hakko V9100iSB Fuji Electric Monitouch | 

V9 Advanced Lineup

V9101iW series

• V9101iWLD
• V9101iWRLD

V9071iW series

• V9071iWLD
• V9071iWRLD

V9 Standard Lineup

V9150iX series

• V9150iXD

V9120iS series

• V9120iSD
• V9120iSB
• V9120iSDB

V9100iS series

• V9100iSD
• V9100iSB

V9080iS series

• V9080iSD
• V9080iSBD

 

V9 Lite Lineup

V9100iC series

• V9100iCD
• V9100iCB
• V9100iCBD

V9080iC series

• V9080iCD
• V9080iCBD

V9060iT series

• V9060iTD
• V9060iTBD

 

HMI Hakko V9100iSB Dimensions and Part Names

		V9100iSB
V9100iSB Power supply	Rated voltage	100-240V AC/ 24V DC
	Permissible range of voltage	AC: -15%, +10%/ DC: ±10%
	Permissible momentary power failure	AC within 20ms, DC within 1ms
	Demand (maximum rating)	AC: 70VA or less/ DC: 28W or less
Insulation resistance		DC500V 10MΩ or more
V9100iSB Physical environment	Ambient temperature	0～50℃ *1
	Ambient humidity	85%RH or less (without dew condensation) *1
	Operation altitude	2,000 meters or lower
	Atmosphere	Not to be exposed to corrosive gas, or conductive dust
	Storage temperature	-10～60℃ *1
	Storage humidity	85%RH or less (without dew condensation) *1
	Overvoltage category	Category II
	Pollution degree	Pollution degree 2
V9100iSB Mechanical operating conditions	Resistance to oscillation	Complies with JIS B 3502 (IEC61131-2) Vibration frequency: 5-9Hz, pulsating with:3.5mm, 9-150Hz, Acceleration: 9.8m/s2(1G),X,Y,Z: 3 directions (10 times each)
	Resistance to shock	Complies with JIS B 3502 (IEC61131-2) Peak acceleration: 147m/s2(15G), X,Y,Z: 3 directions, three times each (18 times in total)
V9100iSB Electric operating conditions	Resistance to noise	Noise voltage: 1,500Vp-p, pulse width: 1μs, pulse rise time: 1ns
	Resistance to static discharge	Complies with IEC61000-4-2, contact: 6kV, air: 8kV
V9100iSB Installation conditions	Grounding	Grounding resistance: Less than 100Ω, FG/SG separation
	Structure	Front panel:Complies with IP66, Type 4X/13 *2 (when waterproof gasket is installed) Rear cover:Complies with IP20 Form: Single unit, Installation method: Panel mounting
	Cooling system	Natural air cooling
	Dimensions W*H*D(mm)	303.8×231.0×54.0
	Panel cutout (mm)	289.0×216.2（+0.5/-0）
Case color		Black (black front housing for black model)
Material		PC resin

• *1: Use at a wet-bulb temperature of 39°C or less because higher temperatures may cause failure.

HMI Hakko V9100iSB Performance Specifications

Screen memory (FROM)		64MB
Backup memory (SRAM)		800KB
V9100iSB Display	Display device	TFT color LCD
	Resolution	800×600
	Display size	10.4″
	Colors	16.7 million *3
	Backlight	LED
	Backlight life	70,000 hours
Touch switch	Type	Analog resistance film
Function switch	Quantity	8
V9100iSB External interface	D-Sub 9-pin (CN1)	RS-232C/ RS-485(2-wire system)/ RS-422(4-wire system), Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200, 187500 *4bps
	Modular 8-pin （MJ1/MJ2）	RS-232C/ RS-485(2-wire system), Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200 bps
	SD card	One card slot provided as standard
	Ethernet	1ch, Baud rate: 100Mbps, 10Mbps
	Wireless LAN *5	Complies with IEEE802.11b/g/n (2.4GHz)
	USB	Type A,Type mini-B(Ver.2.0)
	Sound output	1ch provided as standard
V9100iSB Clock	Backup period	5 years (Ambient temperature 25°C)
	Calendar accuracy	Gap ±90 sec. per month (Ambient temperature 25°C, when power is not supplied)
V9100iSB Standard	CE marking *6	EN61000-6-2、EN61000-6-4、EN50581 *8
	UL･cUL *6	UL61010-1、UL61010-2-201 *7、ANSI/ISA 12.12.01 *2
	KC *8*9	Compliant
	Radio Act *5	Japan: TELEC
Classification Standard *6*8*10		Nippon Kaiji Kyokai (NK) American Bureau of Shipping (ABS) Lloyd’s Register of Shipping (LR) Det Norske Veritas (DNV)

• *2: DC products only. Hardware of Ver. b or later.
• *3: For displaying pictures, 3D parts,video, and RGB input (excluding high-speed mode) only. Other parts are displayed in 65,536 colors.
• *4: Only for Siemens MPI (Incompatible with DUR-00).
• *5: Wireless LAN-compatible products only.
• *6: DC products only.
• *7: Only for Hardware Ver. f or later. Applicable standard for Hardware Ver. a to e is UL 508.
• *8: Wireless LAN compatible products are not supported.
• *9: Black model not certified
• *10: Hardware Ver. c or higher.

 

HMI Hakko Lainnya