V9120iSB HMI Hakko Fuji Electric Monitouch

Jual HMI Hakko V9120iSB Fuji Electric Monitouch

HMI Hakko V9120iSB

Jual HMI Hakko V9120iSB Fuji Electric Monitouch | 

V9 Advanced Lineup

V9101iW series

V9071iW series

V9 Standard Lineup

V9150iX series

V9120iS series

V9100iS series

V9080iS series

 

V9 Lite Lineup

V9100iC series

V9080iC series

V9060iT series

 

HMI Hakko V9120iSB Dimensions and Part Names

V9120iSB
V9120iSB
Power supply
Rated voltage 100-240V AC/ 24V DC
Permissible range of voltage AC: -15%, +10%/ DC: ±10%
Permissible momentary power failure AC within 20ms, DC within 1ms
Demand (maximum rating) AC: 70VA or less/ DC: 28W or less
Insulation resistance DC500V 10MΩ or more
V9120iSB
Physical environment
Ambient temperature 0~50℃ *1
Ambient humidity 85%RH or less (without dew condensation) *1
Operation altitude 2,000 meters or lower
Atmosphere Not to be exposed to corrosive gas, or conductive dust
Storage temperature -10~60℃ *1
Storage humidity 85%RH or less (without dew condensation) *1
Overvoltage category Category II
Pollution degree Pollution degree 2
V9120iSB
Mechanical operating conditions
Resistance to oscillation Complies with JIS B 3502 (IEC61131-2) Vibration frequency: 5-9Hz, pulsating with:3.5mm,
9-150Hz, Acceleration: 9.8m/s2(1G),X,Y,Z: 3 directions (10 times each)
Resistance to shock Complies with JIS B 3502 (IEC61131-2) Peak acceleration: 147m/s2(15G), X,Y,Z:
3 directions, three times each (18 times in total)
V9120iSB
Electric operating conditions
Resistance to noise Noise voltage: 1,500Vp-p, pulse width: 1μs, pulse rise time: 1ns
Resistance to static discharge Complies with IEC61000-4-2, contact: 6kV, air: 8kV
V9120iSB
Installation conditions
Grounding Grounding resistance: Less than 100Ω, FG/SG separation
Structure Protection structure: Front case: IP66, Type 4X/13 *2(when water-proof gasket is used), Rear case: IP20, single unit, installation method: panel mounting
Cooling system Natural air cooling
Dimensions W*H*D(mm) 327.8×261.0×54.9
Panel cutout (mm) 313.0×246.2(+0.5/-0)
Case color Black
(black front housing for black model)
Material PC resin
  • *1: Use at a wet-bulb temperature of 39°C or less because higher temperatures may cause failure.

HMI Hakko V9120iSB Performance Specifications

V9120iSB
Screen memory (FROM)
64MB
Backup memory (SRAM) 800KB
V9120iSB
Display
Display device TFT color LCD
Resolution 800×600
Display size 12.1″
Colors 16.7 million *3
Backlight LED
Backlight life 70,000 hours
Touch switch Type Analog resistance film
Function switch Quantity 8
V9120iSB
External interface
D-Sub 9-pin (CN1) RS-232C/ RS-485(2-wire system)/ RS-422(4-wire system),
Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none,
Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200, 187500*4 bps
Modular 8-pin
(MJ1/MJ2)
RS-232C/ RS-485(2-wire system), Asynchronous type,
Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits,
Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200 bps
SD card One card slot provided as standard
Ethernet 1ch,
Baud rate: 100Mbps,
10Mbps
Wireless LAN *5 Complies with IEEE802.11b/g/n (2.4GHz)
USB Type A,Type mini-B(Ver.2.0)
Sound output 1ch provided as standard
V9120iSB
Clock
Backup period 5 years (Ambient temperature 25°C)
Calendar accuracy Gap ±90 sec. per month (Ambient temperature 25°C, when power is not supplied)
V9120iSB
Standard
CE marking *6 EN61000-6-2,EN61000-6-4,EN50581 *8
UL・cUL *6 UL61010-1、UL61010-2-201*7 、ANSI/ISA 12.12.01 *2
KC *8*9 Compliant
Radio Act *5 Japan: TELEC
Classification Standard *2*8 Nippon Kaiji Kyokai (NK)
American Bureau of Shipping (ABS)
Lloyd’s Register of Shipping (LR)
Det Norske Veritas (DNV)
  • *2: DC products only. Hardware of Ver. b or later.
  • *3: For displaying pictures, 3D parts,video, and RGB input (excluding high-speed mode) only. Other parts are displayed in 65,536 colors.
  • *4: Only for Siemens MPI (Incompatible with DUR-00).
  • *5: Wireless LAN-compatible products only.
  • *6: DC products only.
  • *7: Only for Hardware Ver. f or later. Applicable standard for Hardware Ver. a to e is UL 508.
  • *8: Wireless LAN compatible products are not supported.
  • *9: Black model not certified.

HMI Hakko Lainnya