V9100iC HMI Hakko Fuji Electric Monitouch

Jual HMI Hakko V9100iC Fuji Electric Monitouch

HMI Hakko V9100iC

Jual HMI Hakko V9100iC Fuji Electric Monitouch |

HMI Hakko V9 Advanced Lineup

V9101iW series

V9071iW series

V9 Standard Lineup

V9150iX series

V9120iS series

V9100iS series

V9080iS series

 

V9 Lite Lineup

V9100iC series

V9080iC series

V9060iT series

 

HMI Hakko V9100iC Dimensions and Part Names

V9100iC
V9100iC
Power supply		 Rated voltage 100-240V AC/ 24V DC
Permissible range of voltage AC: -15%, +10%/ DC: ±10%
Permissible momentary power failure AC within 20ms, DC within 1ms
Demand (maximum rating) AC: 50VA or less/ DC: 17W or less
Insulation resistance DC500V 10MΩ or more
V9100iC
Physical environment		 Ambient temperature 0～50℃*1
Ambient humidity 85%RH or less (without dew condensation)*1
Operation altitude 2,000 meters or lower
Atmosphere Not to be exposed to corrosive gas, or conductive dust
Storage temperature -10～60℃*1
Storage humidity 85%RH or less (without dew condensation)*1
Overvoltage category Category II
Pollution degree Pollution degree 2
Mechanical operating conditions Resistance to oscillation Complies with JIS B 3502 (IEC61131-2) Vibration frequency: 5-9Hz, pulsating with:3.5mm,
9-150Hz, Acceleration: 9.8m/s2(1G),X,Y,Z: 3 directions (10 times each)
Resistance to shock Complies with JIS B 3502 (IEC61131-2) Peak acceleration: 147m/s2(15G), X,Y,Z:
3 directions, three times each (18 times in total)
V9100iC
Electric operating conditions		 Resistance to noise Noise voltage: 1,500Vp-p, pulse width: 1μs, pulse rise time: 1ns
Resistance to static discharge Complies with IEC61000-4-2, contact: 6kV, air: 8kV
V9100iC
Installation conditions		 Grounding Grounding resistance: Less than 100Ω, FG/SG separation
Structure Front panel:Complies with IP66, Type 4X/13 *2 (when waterproof gasket is installed)
Rear cover:Complies with IP20
Form: Single unit, Installation method: Panel mounting
Cooling system Natural air cooling
Dimensions W*H*D(mm) 303.8×231.0×54.0
Panel cutout (mm) 289.0×216.2（+0.5/-0）
Case color Light gray
(black front housing for black model)
Material PC resin
  • *1: Use at a wet-bulb temperature of 39°C or less because higher temperatures may cause failure.

HMI Hakko V9100iC Performance Specifications

Screen memory (FROM) 64MB
Backup memory (SRAM) 800KB
V9100iC
Display		 Display device TFT color LCD
Resolution 640×480
Display size 10.4″
Colors 16.7 million *3
Backlight LED
Backlight life 70,000 hours
Touch switch Type Analog resistance film
Function switch Quantity 8
V9100iC
External interface		 D-Sub 9-pin (CN1) RS-232C/ RS-485(2-wire system)/ RS-422(4-wire system),
Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none,
Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200, 187500*4bps
Modular 8-pin
（MJ1/MJ2）		 RS-232C/ RS-485(2-wire system), Asynchronous type,
Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits,
Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200 bps
SD card One card slot provided as standard
Ethernet 1ch,
Baud rate: 100Mbps, 10Mbps
Wireless LAN –
USB Type A,Type mini-B(Ver.2.0)
Sound output –
Clock Backup period 5 years (Ambient temperature 25°C)
Calendar accuracy Gap ±90 sec. per month (Ambient temperature 25°C, when power is not supplied)
V9100iC
Standard		 CE marking*5 EN61000-6-2,EN61000-6-4,EN50581
UL･cUL*5 UL61010-1、UL61010-2-201*6
KC*7 Compliant
Radio Act –
Classification Standard –
  • *2: DC products only. Hardware of Ver. b or later.
  • *3: For displaying pictures, 3D parts,video, and RGB input (excluding high-speed mode) only. Other parts are displayed in 65,536 colors.
  • *4: Only for Siemens MPI (Incompatible with DUR-00).
  • *5: DC products only.
  • *6: Only for Hardware Ver. f or later. Applicable standard for Hardware Ver. a to e is UL 508.
  • *7: Black model not certified

 

HMI Hakko Lainnya

HMI Lainnya

Data Sheet Fuji Electric V9100iC